|
|
| |
Yes, we can ship world wide. |
| |
Yes, you may buy direct. |
| |
Yes, but not on the drive train or on the engine. |
| |
The upper temperature limit is +220° F. However, a pressure relief valve vent kit may be an option to consider for high temp applications. |
| |
The 21oz cylinder has a premium grade of ether and the 18oz cylinders can have size restrictions. |
| |
Yes, virtually all OEM’s have our systems available as options. |
| |
Yes, there are different temperature switches available. |
| |
The absolute minimum length of tubing for an automatic system is 2' and the absolute maximum is 20'. Thus, the range of tubing that can be used for automatic systems is 2' to 20'. Measured Shot systems should retain the minimum of 2' and have a maximum of 5'. |
| |
The temperature limit for standard tubing is -65° F to +200° F. If higher temps are expected, Teflon tubing may be used up to +500° F. |
|
|
Yes, the system may be mounted up to 45 degrees vertical with reasonable degradation in cylinder life expectancy. However we recommend where possible that the system not be mounted more than 22 degrees vertical. |
| |
Replacement cylinders or parts may be purchased directly from KBi. In addition, most Heavy Truck, Construction, or Agricultural dealers such as Detroit Diesel, Caterpillar, John Deere, Kenworth, Etc. should have replacement parts or cylinders available. |
| |
The size of valve body will determine if you have a automatic or push button. Automatic systems have approximately a 1" tall valve body. Push button systems have approximately 3" valve body. |
