ONLINE STORE





KSM for Any Equipment
Available in English and Japanese
Us flag    Japan Flag


KrankingKART
Available in English and Japanese
Us flag    Japan Flag

KSM brochure
KSM for Boats
Available in English and Japanese
Us flag Japan Flag

You are here: Home > ONLINE STORE
Sort By:
Page of 5
Valve or Tubing Fitting
100010 - Valve or Tubing Fitting
List Price: $2.62
Our Price: $1.38

Nut and Sleeve
Nylon Atomizer Tubing
300045 - 60" Nylon Atomizer Tubing
List Price: $8.22
Our Price: $4.34

60" Nylon Atomizer Tubing
DIESELMATIC Heavy Duty Cylinder Clamp
301082 - DIESELMATIC Heavy Duty Cylinder Clamp
List Price: $23.72
Our Price: $12.17

DIESELMATIC Heavy Duty Cylinder Clamp
Injector Nozzle
220315 - Injector Nozzle
List Price: $28.30
Our Price: $14.95

Straight Side Orifice

For Engine Sizes 12.13 Liters (740 CID) and under.
Atomizer or Nozzle Adapter Bushing
300632 - Atomizer or Nozzle Adapter Bushing
List Price: $36.98
Our Price: $19.53

1/8" - 7/8" (14 UNF) Brass Adapter Bushing
BLOCKOR Metering Device
250005 - BLOCKOR Metering Device
List Price: $40.33
Our Price: $21.30

The KBi BLOCKOR Fitting is the heart of a DIESELMATIC System. A BLOCKOR controls the flow rate of starting fluid being injected into the engine and is also responsible for vaporizing the fluid in the most efficient manner possible. The BLOCKOR is the left hand threaded brass elbow fitting located at the bottom of every DIESELMATIC Valve Assembly.

KBi has created a new BLOCKOR fitting that incorporates a threaded filter design as opposed to the O-Ring filter design used in the older style BLOCKOR fitting. This threaded design will eliminate the damage caused to the filter and therefore the metering orifice, from vibration and prolonged exposure to the elements. The new design also incorporates a tubular shaft that has the filter element mounted at one end, creating an annular chamber inside the fitting which will accumulate and trap the particles normally found to have clogged the older filter design. When servicing is required, the new filter can be removed by gently unscrewing the filter unit with a pliers.

  • BLOCKOR's are used and can only be used on a KBi DIESELMATIC or KOMPAC DIESELMATIC System.
  • Metering Orifice's are used and can only be used on a KBi DIESELMATIC NVT or KOMPAC DIESELMATIC NVT System.
  • KBi will supersede all BLOCKOR Fittings with the new Patented filter design.
  • This new design will greatly enhance the life expectancy of the filter and may actually eliminate the need to service the assembly.
  • New BLOCKOR fittings can be identified by the 250XXX part number designation. The old designs were designated as 240XXX part numbers.
  • The new BLOCKOR fittings can also be identified by the Patent Number stamping 5,474,678 found on every fitting.
  • Refer to the KBi Installation - Operation Manual, KBi Form Number 130533, for more detailed information.
DIESEL START Ether Cylinder
20021 - Single DIESEL START Ether Cylinder
List Price: $69.20
Our Price: $36.55

18 Ounces of Premium Ether Fluid
KOMPAC Ether Ctlinder
20051 - Single KOMPAC Ether Cylinder
List Price: $71.69
Our Price: $37.87

8 Ounces of Premium Engine Starting Fluid
DIESELMATIC Ether Cylinder
20030 - Single DIESELMATIC Ether Cylinder
List Price: $76.27
Our Price: $40.29

21 Ounces of Premium Engine Starting Fluid
Economy Valve Assembly
42500 - 12 Volt Economy Valve Assembly
List Price: $128.78
Our Price: $68.02

12 Volt Economy Valve Assembly

For Engine Sizes 8.21 - 18.03 Liters (501 - 1100 CID).

Note: The Economy Valve Assembly does not contain a Ether Cylinder or any additional hardware.