KSM for Any Equipment
Available in English and Japanese
Us flag Japan Flag

Available in English and Japanese
Us flag Japan Flag

KSM brochure
KSM for Boats
Available in English and Japanese
Us flag Japan Flag

Return to Help Index
Additional Support
Best Practices for the Mini HD

Keep your Mini HD performing and get the most out of every jump-start with these helpful tips.

Before the jump-start

  • When transferring the Mini HD from one vessel to another for a rescue, give the Mini HD a quick boost charge from your running vessel to ensure the best jump-start performance
  • Turn off all lights and accessories on the vessel with the dead battery before attempting the jump-start; the increased power draw could decrease the effectiveness of the Mini HD.
  • Before hooking up the Mini HD, make sure the engines on the dead vessel are in neutral. If not in neutral the starter wonít engage and youíll be wasting Mini HD energy.
  • Securely fasten the Mini HD battery clamps as close as possible to the engineís starter motor on the dead vessel. This position helps keep electrical resistance in the circuit to a minimum, improving performance of the Mini HD.
  • Immediately after turning on the Mini HD, turn the key and begin cranking the vessel with the dead battery.

After the jump-start

  • After completing a jump-start, allow the Mini HD to reach its full charge before you turn it off and disconnect from the battery.
  • The voltmeter on the Mini HD can be used as a quick diagnostic tool. If the vessel you just started is not charging up the Mini HD, that vesselís charging system may be faulty.
  • Keep the springs inside the Mini HD battery clamps lubricated in order to help prevent corrosion and ensure proper performance.
How do I contact you?
  Please click here for our company contact information.